Brother DCP7055 New Toner not recorgnised

A Brother DCP-7055 had a new toner installed which is failed to recognise.

 

Resetting the counter resolved the problem:

 

1. Open the front door to access the toner

2. Press the “Clear” button.

3. Press the “Start” button.

(When you press START the screen should clear.)

4. Press the “↓” or “Down Arrow” button.

5. Press the “↑” or “Up Arrow” button.

(When you press the down arrow an ‘E0′ should appear, which will change to ’00′ when you press the up arrow)

6. Press the “OK” button.

(When it say s ‘ACCEPTED’)

7. Close the front door.